Van Điều Khiển Bơm PUMP CONTROL

Sau khi tắt bơm, van sẽ tự động đóng lại hoàn toàn để bảo vệ hệ thống trạm bơm và nhà máy. Việt An Enviro là nhà nhập khẩu trực tiếp van điều khiển bơm cho ngành nước của hãng van Singer Valve – Canada.

1. Van Điều Khiển Bơm Deep Well Pump Control Valve (Double Chamber) 106 / 206-DW 

KEY FEATURES

+ Prevents pump starting and stopping surges

+ No energy loss while pump is running

+ Separate opening and closing speed controls

+ Discharges initial air/water silt to waste, on well applications.

+ Discharges stagnant water at start-up from dormant wells

TYPICAL APPLICATIONS

The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve.

The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed control.

Initially, the valve discharges air, water and sand to waste. The open valve discharges all pump flow. As the valve closes slowly, flow is transferred to the main line smoothly, increasing the pipeline flow without surges. When the valve is fully closed, all pump flow is in the pipeline, with no control valve losses.

When shut-down is required, the pilot solenoid on the valve is de-energized to commence opening. The pump is kept running while the valve slowly opens. Increasing proportion of the flow is diverted to waste with less passing through the check valve, until all flow is diverted through the nearly fully open DW valve. The pipeline check valve closes quietly without surges. When the DW valve is almost fully open, a stem mounted cam triggers the limit switch to stop the pump.

2. Van Điều Khiển Bơm Booster Pump Control Valve (Single Chamber) 106 / 206-PG-BPC 

KEY FEATURES

+ Substantially reduces pump starting and stopping surges

+ Separate opening and closing speed controls

+ Cost effective pump control system

+ Optional internal mechanical drop check reduces power failure surge TYPICAL APPLICATIONS  

  The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge.The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually increased.When shut-down is required, the pilot solenoid is de-energized to close the main valve and reduce the flow. The pump is kept running while the booster pump control valve slowly closes. When the valve is almost fully closed and flow is virtually stopped, a cam triggers the limit switch to stop the pump.With the internal drop check option, the built-in mechanical drop check closes immediately when the flow stops, regardless of the valve position. Whether due to a control malfunction, normal operation or a pump motor power failure, by closing before flow reverses, surges are minimized.The single chamber construction facilitates supplemental modulating functions such as pressure sustaining, pressure reducing, rate of flow control. Being a single chamber design, the control forces are generated by the differential across the valve. When a modulating function is included there are more positive initial closing results.

3. Van Điều Khiển Bơm Booster Pump Control Valve (Double Chamber) 106 / 206-BPC

KEY FEATURES

+ Suitable for most pumping applications including suction lift and low differential head

+ Prevents pump starting and stopping surges

+ Built-in non-slam mechanical check reduces surges on loss of power

+ Separate opening and closing speed controls TYPICAL APPLICATIONS  

  The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge.The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is de-energized to commence closing. The pump is kept running while the valve slowly closes. When the valve is almost fully closed and flow is virtually zero, a stem mounted cam triggers the limit switch to stop the pump.In the event of a power failure, the built-in mechanical drop check closes immediately when the flow stops, independently of the valve position. Surges are minimized by closing the valve before reverse flow occurs.

4. Van Điều Khiển Bơm Hydraulic Check Valve 106 / 206-HC

  KEY FEATURES • Drip-tight seat • Independently adjustable opening and closing speed controls TYPICAL APPLICATIONS  

  The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve – either fully open or fully closed.The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of the valve.When pressure is reversed, the now higher downstream pressure is applied to the upper operating chamber as flow reversal occurs. The diaphragm / inner valve assembly moves down and the valve closes tightly.